Massa M3 Manuale Utente Scaricare il pdf (Pagina 20)

MASSA PRODUCTS CORPORATION June 11, 2013

Product Manual 19 M3 Wireless Ultrasonic Level Sensor

8) Click on Change Profile…

NOTE: Make sure under Serial Services

that Access to the command line interface

is unchecked to reserve the port for the M3

Software.

9) In the Select Port Profile… menu, scroll

down to the bottom, and select Custom

and click the Apply button.

10) While still in the Serial Port Configuration

menu, click Basic Serial Settings. Update

the settings to Baud Rate=9600, Data

Bits=8, Parity=None, Stop Bits=1, and

Flow Control=None. Click the Apply

button.

11) The next step is to load the Massa Python

code into the gateway. Obtain the python

code massa_gateway_appl.py from

http://www.massa.com and save it. Click

on the Applications Python menu, browse

to locate the python file, and then click on

the Upload button to have it placed in the

gateway’s Manage Files server.

NOTE: The Manage Files must also

contain both the python.zip and zigbee.py

files. Download them off the Digi web

site if not present.

12) The Massa Python code must be enabled

when the gateway powers up. In the

Python Configuration menu, click the

Auto-start Settings menu and type

massa_gateway_appl.py in the Auto-start

command line. Check the Enable box and

then click the Apply button. If there are

any other python programs in this Auto-

start Settings menu, make sure they are

disabled.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

Nessun commento

Massa M3 Manuale Utente Pagina 20